Demo · AC monitoring and control

ROI Calculator

Put your own numbers in — units, running hours, tariff — and see which month the install pays for itself. The model shows its assumptions rather than hiding them.

What Enercon would save you

Commercial · Pakistan

Interactive demo · sample data

What you spend against what you save

The flat dashed line is what the system costs you. The rising line is what it saves. Where they cross is the month you have got your money back — everything after that is yours.

What it costs youWhat it saves youThe month you break even

You break even after6months

After that, the saving is yours to keep.

Saved each month293USD

Saved over three years10600USD

Your building

AC unitsper site

Tonnagetons per unit

Authorised hoursapproved running

Unauthorised hoursoutside those hours

Days a monthopen

Currencyfor every figure

TariffUSD per kWh

Sitesoptional

Saving we assume

How much less energy the units use during your authorised hours once setpoints are controlled. We start at the low end of what we have measured, and you can drag it lower.

22%

We have measured 10% to 40% on commercial sites. This starts at the low end. Drag it lower if your building already runs schedules.

Reference ACMC-SAV-01 · figures to be confirmed

Where the saving comes from

Two separate things. One: units running when they are not meant to — after closing, weekends, empty rooms — which a schedule on the device stops outright. Two: units set too cold during your own working hours, which a setpoint floor prevents.

Stopping unauthorised use140USD a monthA schedule held on the unit itself. Running after closing, at weekends or in an empty room simply does not start, and nobody can override it on the way out.

Stopping over-cooling154USD a monthA floor on the setpoint during your authorised hours, so a unit cannot be dropped to 16 °C and left there.

You use now4,930kWh a monthUSD 838 a month

You would use3,200kWh a monthUSD 545 a month

Figures are indicative and confirmed by an on-site assessment.

Send me this as a PDF

Optional — the figures stay on screen either way

Name

Organisation

Phone

12 units at 1.5 tons · 10 authorised hours a day plus 2 unauthorised.

Runs on canned data with no backend. Every facility, zone and unit identifier is invented. A visitor with reduced-motion preferences gets the same demo with the animation resolved to its end state rather than played.

See it on your own building

Two engineers, one day on site, a written report with measured baseline and modelled payback. The demo above runs on invented data; the report runs on yours.

Enercon ACMC30

Book a Site Assessment